Mendota DXV-60 Betriebsanleitung PDF herunterladen (Seite 50)

NATURAL TO LP GAS CONVERSION INSTRUCTIONS

Kit # HA-30-00507 Mendota Model DXV35 DT3

This conversion kit shall be installed by a qualified

service agency in accordance with the manufactur-

er’s instructions and all applicable codes and re-

quirements of the authority having jurisdiction. If the

information in these instructions is not followed ex-

actly, a fire, explosion or production of carbon mo-

noxide may result causing property damage,

personal injury or loss of life. The qualified service

agency is responsible for the proper installation of

this kit. The installation is not proper and complete

until the operation of the converted appliance is

checked as specified in the owner instructions sup-

plied with the kit.

Caution: The electrical supply to the fireplace must

be turned off prior to performing the conversion. The

gas supply must be shut off prior to disconnecting

the electrical power.

ORIFICE SIZES REQUIREMENT:

A Natural Gas to LPG conversion kit #HA-30-00507

is Optional and must be purchased separately.

LP Conversion Kit # HA-30-00507 contains the fol-

lowing parts: One Motorized LP Pressure Regulator #907.012, One LP Pilot Orifice Thimble #977.168, and two Cap Ori-

fices #65-14-00364(drill #3/64”) and an L-shaped Torx wrench.

RECOMMENDED PROCEDURE TO CONVERT THIS FIREPLACE TO BURN LPG

This Fireplace Insert arrives from the factory ready to burn Natural Gas. If you intend to burn LPG, it is highly recommend-

ed that you convert this fireplace and its Pressure Regulator, Pilot Orifice Thimble and Burner Orifices prior to placing this

fireplace in its fireplace cavity.

See diagrams, on this page, and follow these instructions to prepare this fireplace for conversion to LPG.

1. Using a ¼” Hex Driver, remove 2 screws that secure the Rear and Front burners to the Burner Airbox.

2. Lift Up and remove Front Burner.

3. Loosen Front Burner Air Shutter Screw and rotate air shutter open ¼” minimum. Set burner aside.

4. Slide Rear Burner to the right about 2” and lift up and remove from Firebox.

BURNERS MOUNTING

SCREWS

FRONT BURNER

REAR BURNER

LP Pilot Orifice

[#977.168]

Burner Orifices

#65-14-00364[3/64" DRILL]

Motorized

LP Pressure

Regulator

[10.0-5.5"WC]

# 907.012

364

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Mendota DXV-60 Betriebsanleitung Seite 50

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamine Mendota DXV-60