Mendota DXV-60 Betriebsanleitung PDF herunterladen (Seite 40)

Remote Control Transmitter Functions

NOTE: The Wall Receiver will “beep” once every time

a Remote Transmitter Key is pressed, signaling that

the command has been received.

Identify the four function buttons on the Remote

Transmitter:

1. ON/OFF KEY: This button turns

the system ON or OFF. When

this button is pressed and the

system is OFF, the pilot light

will stay ON if the “Standing Pilot Switch” is in

the ON position.

2. THERMOSTAT KEY: This button, when pressed after the ON/OFF KEY is pressed and the

system is ON, will allow the selection of three modes: Manual Operation, Normal Thermostat

and Smart Thermostat.

1. Manual Mode: In this mode, the room temperature is ignored and the fireplace can be turned ON indefinitely.

The room temperature rise has no effect on this mode. All other functions such as fan speed control, flame

height control, secondary burner On/OFF control and Accent Light ON/OFF controls will be manually controll-

able.

2. Normal Thermostat: In this mode, the fireplace will

stay functioning until the room temperature in-

creases 1

F above the Set Point Temperature. To

increase the Set Point Temperature, Press the UP

button until the desired temperature is displayed in

the SET POINT TEMPERATURE window. The fan

will turn on 5 minutes after fireplace startup and will

turn off 12-1/2 minutes after the flames turn off, in

this mode. The flame height can be adjusted while

the fireplace is functioning, fan speed can be ad-

justed after 5 minutes of startup. Secondary burner

can be turned On or Off at any time after startup.

The Accent Light can be turned on or off any time

after startup.

3. Smart Thermostat: In this mode, all other func-

tions except the flame height adjustment are allowed. Manual flame height adjustment is not allowed in this

mode. The Smart Thermostat function adjusts the flame height in accordance to the difference between the

set point temperature and the actual room temperature. As the room temperature gets closer to the set point

temperature, the Smart Function automatically modulates the flame down.

3. UP/DOWN KEY: This key is used to increase or decrease the Set Point Temperatures, Flame

Height and Fan Speed and to toggle between Accent Light ON/OFF and Secondary Burner

ON/OFF.

4. MODE SELECTION KEY: This key is used to toggle between the various function icons : Flame

Height, Fan Speed, Accent Light and Secondary Burner.

SMART

OFF

SMART

MODE

NORMAL

THERMOSTAT

MANUAL

MODE

MAXMAX

OFF

76°

F F

76°

ON SMART

76°

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Mendota DXV-60 Betriebsanleitung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamine Mendota DXV-60