Mendota DXV-60 Betriebsanleitung PDF herunterladen (Seite 26)

GLASS FRAME ASSEMBLY REPAIR AND REPLACEMENT

TO REPLACE DAMAGED GLASS

1. Using an 1/8” drill bit, drill through 3 rivets on each side of glass frame.

2. Remove glass retainer brackets and the damaged glass and gasket material. Clean the inner surface of the glass

frame.

3. Assemble new gasket on glass edge starting with the bottom left corner. The adhesive on the gasket should

make contact with the glass surface. Use tracer lines in gasket to determine where the glass should sit on the

gasket surface.

4. Place glass and gasket assembly in glass frame. Carefully attach glass retainer brackets to sides of glass frame

using new 1/8” Aluminum rivets.

The glass frame assembly and its individual components are available through Johnson Gas Appliance Company. Contact

your dealer for more detailed ordering information.

GLASS FRAME ASSEMBLY REPLACEMENT PARTS LIST

ITEM PART NUMBER DESCRIPTION

HA-30-00411

FRAME, WELDMENT, GLASS,

DXV35 DT 3

2 65-02-00103

GASKET, TADPOLE,

3/8”BULB, 3/4” TAIL

3 65-06-00463

GLASS, CERAMIC, DXV35

DT3

WARNING

Do not operate this appliance

with the glass removed, cracked

or broken. Glass should be r e-

placed by a licensed or qualified

person.

WARNING

Use only authorized parts and

materials obtained from Johnson

Gas Appliance Company when

replacing defective or damaged

glass.

DO NOT substitute other manufac-

turer's materials or components.

DO NOT operate unit with cracked,

broken or missing glass.

DO NOT abuse the glass door by

striking the glass, slamming the

door shut, etc

GLASS

TRACER LINES

IN GASKET

GLASS SHALL SIT BETWEEN

TRACER LINES IN GASKET

ROTATE GASKET UP

SO ADHESIVE MAKES

CONTACT WITH GLASS

SURFACE

ADHESIVE

GASKET

GASKET IN

FLAT FORM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Mendota DXV-60 Betriebsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamine Mendota DXV-60